Safety Instructions; General Power Tool Safety Warnings - VONROC LM502AC Traducción Del Manual Original

EN

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to
follow the safety warnings and the instructions may
result in electric shock, fire and/or serious injury.
Save the safety warnings and the instructions for
future reference.
The following symbols are used in the user manual
or on the product:
Read the instructions!
Risk of personal injury.
Risk of electric shock.
Wear hearing protection.
Wear eye protection.
Beware of sharp blades. Blades continue to
rotate after the motor is switched off – Re-
move plug from mains before maintenance
or if cord is damaged.
Keep bystanders, especially children and
pets, at a distance greater than 10m.
Keep the powercord away from the cutting
blades.
The lawn mower shall not be operated
without either the entire grass catcher or
the guard in place.
Do not use in the rain or leave the mower
outdoors while it is raining.
Double insulated for additional protection.
Conforms to all relevant European
Directives.
Indicated danger, warning, or caution.
6
Do not dispose of the product in unsuitable
containers.
The guaranteed sound power level
LWA = 96 dB(A)

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference. The term "power tool" in the warnings
refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1) Work area safety
a) Keep the work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive atmos­
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while ope­
rating a power tool. Distractions can cause you
to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi­
tions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp location
WWW.VONROC.COM