Important Safety Instructions - Samsung SOC-420 Manual De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Important Safety Instructions

CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
E
ELECTRIC SHOCK, DO NOT
REMOVE REAR COVER. NO
USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED
SERVICE PERSONNEL.
1.
Make sure that the cable is plugged in securely before using.
(A loose connection may result in fire.)
2.
When installing the camera on a wall or ceiling, mount it safely and
securely. (A falling camera may cause personal injury.)
3.
Do not place conductive objects (e.g., screwdrivers, coins, and
metal things) or containers filled with water on top of the camera.
(Serious injury may result from fire, electric shock, or falling objects.)
4.
Do not install in a sooty, dusty, or humid location.
(Doing so may cause fire or electric shock.)
5.
If any unusual smells or smoke come from the unit, stop using the
product. In such case, immediately disconnect the power source and
contact the service center. (Continued use in such a condition may
cause fire or electric shock.)
2
This symbol indicates high voltage
is present inside. It is dangerous
to make any kind of contact with
any inside part of this product.
This symbol alerts you that
important literature concerning
operation and maintenance has
been included with this product.
6.
If this product fails to operate normally, contact the store of purchase or
your nearest service center. Never disassemble or modify this product in any
way. (The manufacturer is not liable for any damage resulting from
unauthorized disassembly or repairs.)
7.
When cleaning, do not spray water directly onto parts of the product. (Doing
so may cause fire or electric shock.) Wipe the surface with a dry cloth.
Never use detergents or chemical cleaners on the product, as this may result
in discoloration of surface or cause damage to the finish.
1.
Do not drop objects on the product or apply strong shock to it. Keep away
from a location subject to excessive vibration or magnetic interference.
2.
Do not install in a location subject to high temperature (over 50
low temperature (below -10
°C/
14
°F
), or high humidity. (Doing so may cause
fire or electric shock).
3.
Avoid a location which is exposed to direct sunlight, or near heat sources
such as heaters or radiators. (Neglecting to do so may result in a risk of fire).
4.
If you want to relocate the already installed product, be sure to turn off the
power and then move or reinstall it.
5.
Install in a well - ventilated location.
6.
Remove the power plug from the outlet when there is a lightning storm.
(Neglecting to do so may cause fire or damage to the product.)
E
°C/
122
°F
),
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Soc-420pSoc-220Soc-220p

Tabla de contenido