Leuze BCL 300i Manual Del Usuario página 14

Safety
This sensor was developed, manufactured and tested in line with the applicable
safety standards. It corresponds to the state of the art.
Intended use
Bar code readers of the BCL 3xxi series are conceived as stationary, high-speed
scanners with integrated decoders for all current bar codes used for automatic
object detection.
Areas of application
The bar code readers of the BCL 3xxi series are designed for the following areas of
application:
- Storage and conveying technologies, in particular for object identification on
fast-moving conveyor belts
- Pallet transport systems
- Automobile sector
- Omnidirectional reading
CAUTION!
Observe intended use!
The protection of personnel and the device cannot be guaranteed if the
device is operated in a manner not complying with its intended use.
 Only operate the device in accordance with its intended use.
 Leuze electronic GmbH + Co. KG is not liable for damages caused
by improper use.
 Download the device operating instructions:
www.leuze.com
 Read this supplement and the operating instructions for the device
before commissioning the device. Knowledge of these documents is
required in order to use the equipment for its intended purpose.
NOTE
Comply with conditions and regulations!
 Observe the locally applicable legal regulations and the rules of the
employer's liability insurance association.
Foreseeable misuse
Any use other than that defined under "Intended use" or which goes beyond that use
is considered improper use.
In particular, use of the device is not permitted in the following cases:
- in rooms with explosive atmospheres
- in circuits which are relevant to safety
- for medical purposes
EN
14