Wittur WSG-S1.2 Manual De Instrucciones página 67

4 Mechanical installation
4.4.1 Installation of the hub onto the shaft
Fig. 4 Installation of the hub onto the shaft
4
4.1
1. Insert keyway (4.1) into the shaft.
2. Press hub (4) onto the shaft.
3. Secure hub against axial displacement, e.g. using a circlip (4.2).
(
Stop!
In reverse operation, it is recommended to additionally glue the hub to the shaft,
(e.g. using Delo−ML 5328)!
4.4.2 Brake assembly
Assembly without counter friction face
Fig. 5 Assembly without counter friction face
4
15 End shield
Hub 4.2
Keyway 15
Hub
Circlip
End shield
j | BA 14.0197 | 11/2010
i
BFK464−XX−S−005.iso/dms
BFK464−XX−S−006.iso/dms
23