Wittur WSG-S1.2 Manual De Instrucciones página 72

j | BA 14.0197 | 11/2010
4 Mechanical installation
4.4.5 Assembly of the cover seal
(
Fig. 11 Assembly of the cover seal
1. Pull the cable through the seal (13).
2. Push the seal (13) over the complete stator (1).
3. Press the lips of the cover seal (13) into the groove of complete stator (1) and flange
(6)/end shield.
(
28
Stop!
Brakes without flange require a groove at the end shield for the lip of the cover
seal.
1 Complete stator
2 Armature plate
Stop!
Cover seal with condensation drain hole:
Attach cover seal such that condensate can run off through hole.
BFK46420_1−004.iso/dms
6 Flange
10 Cheese head screw
BFK464−XX−S−002.iso/dms
13 Cover seal