Siefken GD1020 Instrucciones De Uso página 37

3 YEARS
L I M I T E D WA R R A N T Y
WARNING To reduce the risk of injury when grinding:
• ALWAYS use the proper guard.
• ALWAYS properly install the guard.
• ALWAYS hold the tool rmly with both hands using the handles provided before and during grin-
ding.
• NEVER use a wheel that has been dropped.
• NEVER bang grinding disc onto work.
• NEVER grind without proper safety equipment.
Installing, Removing and Adjusting the Guard This tool is shipped with a guard. The guard must be
used when using the tool as a grinder. The guard may be removed when using tool as a sander.
1. To install the guard, unplug the tool and remove any accessories from the spindle.
2. Line up the tabs on the grinder with the slots in the guard.
3. Press in the lock lever and press the guard onto the tool.
4. To adjust the guard, press in the lock lever and rotate the guard to one of the detent slots.
5. To remove the guard, unplug tool and remove any accessories from spindle.
6. Press in the lock lever and rotate the guard to line up the tabs on the grinder with the slots in the
guard.
7. Press in the lock lever and pull the guard away from the tool.
11