M6 X 12 Mm Bolt X 8; M6 X 12 Mm; Adjustable Glide X 2; M6 X 60 Mm Bolt X 6 - Uline H-7741 Manual Del Usuario

M6 x 12 mm Bolt x 8

Acrylic Panel x 1

(optional)
1. Slide support frame over leg connector and attach
using four M6 x 12 mm bolts. Repeat for second leg
connector. (See Figure 7)
Figure 7
2. Insert adjustable glide into foot of each leg.
(See Figure 8)
Figure 8
PAGE 4 OF 24
L-DESK RETURN ASSEMBLY PARTS LIST

Adjustable Glide x 2

Dual Bracket with Holder x 2
(optional)
L-DESK RETURN ASSEMBLY

M6 x 12 mm

Bolt
Allen
Wrench
Adjustable
Glide

M6 x 60 mm Bolt x 6

M6 x 15 mm Bolt x 4
(optional – 4 for H-8220
or H-8221)
3. Align holes of assembled L-Desk return over holes on
desk frame and attach using two M6 x 15 mm bolts.
Repeat for second set of holes. (See Figure 9)
NOTE: Diagram shows right-hand L-Desk
configuration. For left-hand L-Desk configuration,
attach return frame to opposite side.
Figure 9
M6 x 15 mm
Bolt
For L-Desk assembly, proceed to Step 4.
For L-Desk Workstation assembly, proceed to
Step 1 on page 7.

Black Grommet x 1

Silver Grommet x 1
0421 IH-7741