Device Overview - Auerswald COMfortel D-600 Guía Rápida

Device Overview

A
B
C
A Keypad
B Basic navigation
Delete: Press this to delete texts and entries in the Contacts and the call
log.
Home: Press this to call the home screen. Previously started actions
continue in the background.
Back: Press this to return to the most recently opened menu and end the
current action.
C Proximity sensor, Brightness sensor
D Casing LED
Flashing Incoming call
Lights up Active call
E Touch display
F Soft icons
D
Menu: Press this to open the menu.
E
Call Log: Press this to open the caller list.
Contact: Press this to open the Contacts.
G Dedicated function keys
Messages: Press this to open the messages list. You can, for example,
F
select a message in the list to display missed or outgoing calls.
When the voice mailbox is set up (only for operation on a PBX), you can
also open the message list.
G
If there are important messages, this is shown by a flashing red LED.
Microphone: Press this to switch the microphone on or off during a call.
The key's LED flashes red as soon as the microphone is switched off.
Hold: Press this to initiate a query call and then to end it.
H
Redial: Press this to display the redial list, which contains the last telephone
numbers dialled.
Headset: Press this to enable/disable headset operation in idle state.
It initiates the call when it is received.
When headset operation is enabled, the LED lights up green.
Transfer: Press this to transfer calls without prior notification.
Loudspeaker: Press this to initiate calls without having to pick up the
receiver.
Switches the speaker on during an on-going call.
The key's LED flashes red as soon as loudspeaker listening is switched on.
The key's LED lights up red as soon as hands-free calling is switched on.
Plus and Minus: Press these keys to increase or reduce the volume of the
ringer, receiver, or loudspeaker, depending on operational state.
H Directional pad
Use the directional pad to navigate in the display.
In the menus: press ▲ or ▼ to scroll through the menu options.
During setup: press ◄ or ► to select from predefined entries.
When entering text: press ◄ or ► to move the cursor.
OK: Press the OK key to call up menu options, select and close entries and
start functions.