Associated Documentation; Supplementary Documentation; Manufacturer's Certificates; Manufacturer Address - Pepperl+Fuchs LHCR-51 Manual De Instrucciones

LHCR-51, LHCS-51
SI00494O-C
Associated
documentation
Supplementary
documentation
EN
Manufacturer's
certificates

Manufacturer address

Other standards

Extended order code

10
This document is an integral part of the following documents:
• BA00382O (HART)
• BA00383O (PROFIBUS PA)
The documents which are supplied and correspond to the device type apply.
Explosion protection compendium
EU-Declaration of conformity
see page 3
ATEX certificate
Certificate number: PF 13 CERT 2899
List of applied standards: see page 3
IEC certificate
Certificate number: IECEx DEK 13.0056
Affixing the certificate number certifies conformity with the following standards (depending on the
device version).
• IEC 60079-0:2011
• IEC 60079-11:2011+ Corr. 1:2012
Pepperl+Fuchs GmbH
Lilienthalstraße 200, 68307 Mannheim, Germany
Internet: www.pepperl-fuchs.com
Among other things, the following standards shall be observed for proper installation:
• IEC/EN 60079-14:2012: "Explosive atmospheres - Part 14: Electrical installations design,
selection and erection"
• EN 1127-1:2011: "Explosive atmospheres - Explosion prevention and protection - Part 1: Basic
concepts and methodology"
The extended order code is indicated on the nameplate, which is affixed to the device in such a way
that it is clearly visible. Additional information about the nameplate is provided in the associated
manual.
Structure of the extended order code
Device type Basic specifications
LHCR-51 – XXXXXXXXXXXX-XX
LHCS-51 – XXXXXXXXXXXX-XX
X = Placeholder
At this position, an option (number or letter) selected from the specification is displayed
instead of the placeholders.
Basic specifications
The features that are absolutely essential for the device (mandatory features) are specified in the
basic specifications. The number of positions depends on the number of features available.
The selected option of a feature can consist of several positions.
Optional specifications
The optional specifications describe additional features for the device (optional features). The
number of positions depends on the number of features available.
More detailed information about the device is provided in the following tables. These tables describe
the individual positions and IDs in the extended order code which are relevant to hazardous
locations.
Optional specifications
+ X.XXXX
+ X.XXXXXX