Troubleshooting Guide - Badger WBP26HT Manual Del Operador

For assistance with your product, visit our website at www.wildbadgerpower.com for a list of service centers, or call
BADGER at 1-844-786-7335.
PROBlEM
The engine stalls, is difficult to start
or does not start
The engine turns, but stalls or does
not accelerate correctly
The engine does not engage
Made in China
Product manufactured by:
Sunseeker Professional Power Equipment
Charlotte NC 28079

TROUBLESHOOTING GUIDE

BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns
CAUsE
Fuel filter blocked
Fuel supply blocked
Carburetor
The fuel mixture is too rich
Switch in off position
No spark/electrical problem
Locked switch
Bad spacing of the spark plug electrodes Adjust the gap to 0,6-0,7 mm
Spark plug electrodes contaminated
Defective spark plug
Fair wear and tear
Dirt or residue in the fuel
Dirt or residue in the fuel
Fair wear and tear
Vibration
Prolonged use in dirty or dusty places
Fair wear and tear
Internal engine problem
CORRECTiOn
Clean or replace fuel filter
Clean or replace carburetor
Ask your distributor for advice
Open the throttle valve
Clean or replace the air filter
Adjust the carburetor
Ask your distributor for advice
Set the switch to the ON position (Run)
Ask your distributor for advice
Ask your distributor for advice
Clean or replace spark plug
Replace the spark plug
Clean or replace air filter
Replace fuel filter
Clean or replace fuel/fuel vent
Clean, adjust or replace spark plug
Adjust carburetor
Clean cooling system
Replace spark suppressor
Ask your distributor for advice
English
9