Preparation For Assembly Of The Glass Side Panel - Carbel A-70 Plus Manual De Montaje, Uso Y Mantenimiento

6.2. Preparation for the assembly of the glass side panel
For fixing the glass panel to the device, the angular metal piece should be fixed in place.
Metal piece
This metal piece will effectively direct the preheated air located in the upper part of the device to the glass panel,
maintaining it cleaner for a longer period of time.
This piece should only be placed on the side where the glass panel will be installed. (in case two glass sides will be
installed, two metal pieces should be placed beforehand; one on each side)
NB on the side where the steel and refractory cement panel will be placed, this piece should not be installed.
In order to be able to screw this metal piece into place, the deflector should be taken out of the device. Once the
metal piece is in place, the deflector should be put back.
This angular piece is installed in the interior of the device
Vista int Interior view
Ubicación chapa angular
Put the piece into place as shown in the images and screw it into place directly on the metal
Página 30 de 43