22- Clean the water inlet filters and the external
dispenser conducts once a month.
23- Never clean the exterior by water injection;
functional parts of the machine could
damage.
24- If the washing machine is to be idle for long
periods, apply a coat of Vaseline oil to all its
stainless
All models comply to standard EN ISO 10472 concerning the safety requirements for industrial laundry machinery.
2006/42/EC Machinery Safety Directive
2006/95/EC Low Voltage
2004/108/EC Electromagnetic Compatibility Directive
For models with a drum capacity of less than 120 dm
Standards EN 60335-1 and EN 60335-2-7 concerning Electrical appliances.
Standards EN 55014, EN 61000-3-2 and EN 61000-3-3 on Electromagnetic compatibility.
For models with a larger capacity:
Standard EN 60204-1 concerning Electrical appliances.
Standards EN 61000-6-1, EN 61000-6-3 y EN 61000-3-1 on Electromagnetic compatibility.
When transporting the appliance, the following should be observed:
Current regulations and laws
o
Regulations concerning occupational risk prevention
o
Regulations concerning safety during transport
o
Check the delivery is in good condition prior to receipt.
5. CHARACTERISTICS OF THE PLACE OF INSTALLATION
As established in current legislation, an omnipolar switch must be installed between the appliance and the mains
electricity supply with a minimum distance of 3 mm for each pole between contacts.
The washing machine must be firmly secured on the floor, which will support its weight and the residual force
generated while spinning.
The washing machine must be correctly levelled leaving spaces to make maintenance easier, 0.5 m on the side and 1
m at the rear.
WARNING! The stopcocks should be close to the appliance in an easily accessible location.
steel
surfaces.
KEEP THESE INSTRUCTIONS SAFELY
3. STANDARDS
3
4. TRANSPORT
6. HANDLING
25- An annual general revision is recommended
WARNING! Repairs or work carried out by personnel
not belonging to the authorised Technical Service will
result in the loss of cover under guarantee.
CAUTION! Fire protection regulations must be strictly
observed.
WARNING! Before starting to connect the appliance,
check that the installation values match those given on
the appliance specification plate.
(4.24 cu.ft):
4
ENGLISH