EN
BEFORE FIRST USE
Assembling castors: put the appliance on a flat surface, take out the wrench
from foam box, then assemble the castors.
Watering: pull 1/3 water tank, then add clean water. Pay attention to the level
of water tank when add water. The level of water tank should not over "MAX"
scale at any time, when humidifying, the total level of water tank should not
below "MIN" scale.
Ice box: Put ice or frozen ice box to the water tank if you want to strengthen
the efficiency of cooling. But the total level of water tank should not over
"MAX" scale.
USE AND OPERATION
Controls
0 on control panel: Press the key, turn on the appliance, second press, shut it
down.
1/2/3: press this key, start the appliance, the corresponding function changes
as follows when you press the key serially: 1 > 2 > 3 > 1.
Swing: press this key, the wind direction can swing flatly, and the swing
indicator light is on. It cancels this function when you press again. NOTE:
You also can swing the blades transversely by your hands, choose the wind
direction up and down.
Cool: press the key to start cooling system. It cancels this function when you
press again. IMPORTANT: Please be sure there is enough water in the water
tank before press this key. DO NOT PRESS THE KEY "COOL" WITHOUT OF
WATER!
12