Simplex Solar Controller; Safety Instructions - TiSUN SIMPLEX Guia Del Usuario

SIMPLEX solar Controller

Installation and Operation Manual
IMPORTANT!
Before starting work the installer should carefully read this Installation &
Operation Manual, and make sure all instructions contained there in are
understood and observed.
The Solar controller should be mounted, operated and maintained by
specially trained personnel only. Personnel in the course of training are only
allowed to handle the product under the supervision of an experienced fitter.
Subject to observation of the above terms, the manufacture shall assume the
liability for the equipment as provided by legal stipulations.
All instructions in this Installation & Operation manual should be observed
when working with the controller. Any other application shall not comply with
the regulations. The manufacturer shall not be liable in case of incompetent
use of the control. Any modifications and amendments are not allowed for
safety reasons. The Solar controller maintenance may be performed by
service shops approved by the manufacturer only.
The functionality of the controller depends on the model and equipment. This
installation leaflet is part of the product and has to be obtained.
APPLICATION
The Solar controller is developed for Solar heating system. The temperature
of the water in the tank is controlled by temperature difference "dt" between
solar collector and tank.
The controller is normally used in conjunction with a hydraulic control unit
which includes a circulation pump, Safety valve.
The controllers have been designed for use in dry environments, e.g. in
residential rooms, office spaces and industrial facilities.
Verify that the installation complies with existing regulations before operation
to ensure proper use of the installation.

SAFETY INSTRUCTIONS

Before starting work disconnect power supply!
All installation and wiring work related to the controller must be carried out
only when de-energized. The appliance should be connected and
commissioned by qualified personnel only. Make sure to adhere to valid
safety regulations.
The controllers are neither splash- nor drip-proof. Therefore, they must be
mounted at a dry place.
Do not interchange the connections of the sensors and the 230V connections
under any circumstances! Interchanging these connections may result in life
endangering electrical hazards or the destruction of the appliance and the
connected sensors and other appliances.
4