EASY INSTALLATION
INSTRUCTIONS
STEP 1
Remove your
existing shower
head. To remove,
turn the existing
shower head in a
counterclockwise
direction.
STEP 4
Screw the 2-Way
Shower Adapter
clockwise onto taped
portion of the shower
arm. Wrap plumber's
tape 3 turns around
threaded ends of
2-Way Shower
Adapter.
ATTENTION:
CHECK WATER TEMPERATURE AND
ADJUST AS NEEDED BEFORE WASHING YOUR PET.
USING THE 2-WAY SHOWER ADAPTER
To change the shower spray: Place your index
finger on one lever and your thumb on the other
lever and rotate either clockwise or counter
clockwise (depending on the current position)
until you feel it click into place.
EASY TWIST
SPRAY
SELECTION
Using multiple spray patterns
during your pet's shower has
never been easier. With the
PetJet's easy twist design, simply
rotate the easy spray selector for
a quick spray change.
P
et
STEP 2
STEP 3
Remove any
Wrap plumber's
remnants of old
tape clockwise 3
plumber's tape and
or 4 turns around
flush out shower
threaded end of
pipe for 5 to 10
shower arm.
seconds.
STEP 5
STEP 6
In a clockwise
Attach end of coiled
direction, screw
hose to 2-Way
existing shower
Shower Adapter and
head onto the
hand tighten. Attach
taped portion of
PetJet shower to
the 2-Way Shower
other end of coiled
Adapter and hand
hose and hand
tighten.
tighten.
USING THE FLOW
CONTROL
Located on
the back of
the PetJet
s h o w e r
h e a d , t h e
flow control lever eliminates sudden
blasts of water to make your pet feel
comfortable and secure.
NOTE: The flow control lever is not
a shut off valve. When turned to the
lowest position, the shower head
continues to flow. This is a normal
safety feature. Unit may be in lowest
flow (gentle stream) position during
shipping. Please check the position
of flow control lever upon installation.
J
et
PLEASE DO NOT RETURN THIS
If you need installation assistance, replacement
parts or have questions regarding our warranty
Support is also available via email at
H
igH
M
ediuM
L
ow
Monday-Thursday 7:00 am to 5:00 pm PST
STOP!
NEED HELP?
PRODUCT TO THE STORE.
please contact customer service at
1.866.440.9257
1.775.420.5600
or
support@oxygenics.com
Be sure to visit our website at
www.oxygenics.com
Business Hours:
Friday 7:00 am to 4:30 pm PST
For use with automatic
compensating valves
rated at 1.88 GPM
(7.10 L/min) or less.