Publicidad
Idiomas disponibles
Idiomas disponibles
ELECTRICAL FIREPLACE ASSEMBLY INSTRUCTIONS
8. Hold the door (K) and align with the inside of the
side wall of the main body. Align and slide the
hooks/catches on the hinge body attached to
door (K) into the recesses in the hinge mounting
plates attached to the inside wall of the main body.
Then press on the back part of the hinge body until
it clicks into place, Repeat for other hinges.
To remove press the square button at the back
of the hinge body to release the hinge from the
mounting bracket. Unlock both hinges and pull
the door away from the fireplace body.
1035IM-28-225 7#
9. If you need to adjust the doors, do so in the following manner.
To adjust door up or down, loosen screws (a) on both hinges, adjust door, and retighten screws.
To adjust door left or right, turn screws (b) on both hinges, in or out.
To adjust door in or out, loosen screws (c) on both hinges, adjust door, and retighten screws.
9
a
1035IM-28-225 8#
2
2
a
(CONT'D)
8
1
b
7
1
1
1
J
K
J
2
c
K
2
c
Publicidad
