Precor SPINNER CHRONO POWER Guía De Inicio página 10

To enter the Setup/Service mode:
1. Begin pedaling. The Welcome screen appears.
Note You can only enter the Setup/Service mode from the Welcome screen.
2. Press and HOLD down the blue button while doing the following at the same time:
- Press and release the white button.
- Press and release the green button.
- Press and release the green button again.
- Press and release the white button.
3. Release the blue button.
Modifying the Club Parameters settings
Use Club Parameter settings to choose the type of information you want exercisers to see on the console while
working out.
Note Many of these settings can be defined on a formatted USB stick, which can then be used to set up multiple
consoles with identical settings. For more information, contact Precor Customer Support.
Setting
Description
UNITS Speed and distance measurements
BACKLIGHT Three is the brightest setting
DISP MODE Energy measurements
Active Status Light (ASL): Turns on and tests light so its color alerts
ASL SETUP
owner of bike maintenance issues
Turn ON so that exerciser's can pair their phone to save their workout
BT PAIRING
information
•
MAJOR INSP
•
•
CLEAR ERROR Select CLEAR to delete errors from the error log
DEVICE ID
The default number is based on the product lower serial number
•
LANGUAGE
•
SETUP For use with USB stick during setup
Returns all settings to factory defaults, except system information
RESET
(number of workouts, hours, and distance)
PROGRAM For use with USB stick during software upgrades
After routine inspection and maintenance, clear this setting to
reset the ASL to steady blue, clear the error log, and reset the
maintenance value back to the maintenance default.
The maintenance default is 1000 miles
Change this default using a Setup.ini file
Service mode is English only
Select the language for all exercisers
Setting options (default in bold)
MPH, KPH
3, 1, 2
SPINPOWER, CAL, KJ
ON, OFF, YELLOW ON, BLUE ON
SHORT, ON, OFF
KEEP, CLEAR
KEEP, CLEAR
Default ID # (Can be customized
using the blue button)
ENGLISH, SPANISH, FRENCH,
GERMAN
NO, YES
NO, YES
NO, YES