Publicidad
Idiomas disponibles
Idiomas disponibles
ment. However, these components are required for the
correct operation of the appliance. Appliances marked
by this symbol are not allowed to be disposed of togeth-
er with the household rubbish.
Notes on the content materials (REACH)
Current information on content materials can be found
at: www.kaercher.com/REACH
Accessories and spare parts
Only use original accessories and original spare parts.
They ensure that the appliance will run fault-free and
safely.
Information on accessories and spare parts can be
found at www.kaercher.com.
Scope of delivery
The scope of delivery for the appliance is shown on the
packaging. Check the contents for completeness when
unpacking. If any accessories are missing or in the
event of any shipping damage, please notify your deal-
er.
Symbols on the device
General warning symbol
Read the operating instructions and all
safety instructions before operating the
device for the first time.
Wear non-slip, sturdy gloves when work-
ing with the device.
Wear non-slip safety shoes when work-
ing with the device.
Always wear suitable eye protection and
hearing protection when working with the
device.
Do not subject the device to rain or moist
conditions.
Electrical hazard. Keep a minimum dis-
tance of 10 m away from overhead lines
10m
when working with the device.
Danger due to flung objects. Keep spec-
tators, especially children and pets, at
least 15 m away from the work area.
Keep your hands away from the blades.
Description of the device
The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
See graphics page for illustrations
Illustration A
Trigger
1
Trigger lockout button
2
Handle housing
3
Type plate
4
Battery pack unlocking button
5
Cutting blade
6
Hook
7
Blade guard
8
*Quick Charger Battery Power 18V
9
*Battery Pack Battery Power 18V
10
* Not included in the scope of delivery
Rechargeable battery pack
The device can be operated with a 18 V Kärcher Bat-
tery Power battery pack.
Removing the blade guard
1. Remove the blade guard.
Illustration B
Mounting the hook
1. Mount the hook using a suitable Phillips screwdriver.
Illustration C
Installing the battery pack
1. Push the battery pack into the mounting in the de-
vice until it audibly latches into place.
Illustration D
Basic operation
1. Check the tree and the branches to see if any dam-
age such as rot is present or if the branches are un-
der tension.
2. Hold the device firmly with both hands.
Illustration E
3. Use the hook to remove loose bark or branches.
Illustration F
Switch on the device
1. Press the trigger lockout button.
Illustration G
2. Press the trigger.
The device starts up.
3. Release the trigger.
The device stops.
Removing blockages
Wood chips or bark can lead to blockage of the cutting
blades.
WARNING
Removing blockages
Incision injuries from the sharp blade or sharp-edged
objects
Wear protective gloves when checking for blockages or
removing blockages.
1. Press the trigger 3 - 4 times.
If the blockage cannot be removed, proceed as follows:
2. Remove the battery pack (see Chapter Removing
the battery pack).
English
Initial startup
15
Publicidad
Capítulos
