Descargar Imprimir esta página

EcoFlow RIVER Pro Manual Del Usuario página 11

Ocultar thumbs Ver también para RIVER Pro:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 118
Protection Information Instruction
The RIVER Pro display screen uses different icons and combined icons to indicate the reason for protection.
USB-A Overload
Protection
USB-C High Temperature
Protection
USB-C Overload Protection
High Temperature
Recharge-protection
High Temperature
Discharge-protection
Low Temperature
Recharging-protection
Low Temperature
Discharge-protection
Overload
Recharging-protection
Overload
Discharging-protection
Communication Failure
between Main Board and
BMS
Light stays on
USB-A and OVERLOAD icons flash together.
Disconnect all electrical appliances and wait 10
seconds before adding each appliance back.
USB-C and High-Temperature icons flash together.
Disconnect electrical appliance and let RIVER Pro cool
down before adding appliance back.
USB-C icon and the OVERLOAD icon flash together.
Disconnect electrical appliance and wait 10 seconds
before adding appliance back.
RECHARGING TIME, Exclamation and High-Temper-
ture icons flash together. This will happen especially
when you recharge the RIVER Pro immediately after
a heavy battery use. Disconnect Charging Cables
and all electrical appliances and wait until RIVER Pro
has cooled down before plugging Charging Cable
back in and recharging.
Exclamation and High-temperature icons flash
together. Turn OFF System Power and let RIVER Pro
cool down before turning the System Power back on.
Recharging Time, Exclamation and Low-Temperature
icons flash together. Disconnect Charging Cables and
all electrical appliances and place RIVER Pro in warm-
er place before plugging Charging Cable back in and
recharging.
Exclamation and Low-Temperature icons flash
together. Turn OFF System Power and place RIVER
Pro in warmer place before turning the System Power
back on
RECHARGING TIME, Exclamation and OVERLOAD
icons flash together. Unplug Charging Cables, re-
start RIVER Pro and plug back in.
Exclamation and Overload icons flash together.
Disconnect all electrical appliances, restart RIVER Pro,
and add each appliance back in in turn. Please note
that electrical appliances must be operated within
rated power.
Only the Exclamation icon is flashing. Restart RIVER Pro.
The Exclamation icon is on. Restart RIVER Pro.
6

Publicidad

loading