Kit Assembly - Metra 95-8239B Instrucciones De Instalación

ISO DDIN radio provision
1. Secure the radio brackets to the
radio trim panel using (2) #8 x
3/8" Phillips truss head screws
supplied. (Figure A)
2. Secure the radio to the radio-
bracket/trim assembly using
screws supplied with the radio.
(Figure B)
3. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
4. Reassemble the dash in reverse
order of disassembly.

Kit Assembly

(Figure A)
95-8239B
(Figure B)
3