Cleaning And Maintenance; Technical Data - camry CR 7715 Manual De Uso

19.Always turn the fan heater off and set the thermostat dial to minimum before removin
the power plug from the socket.
20.Never use the fan heater in high humidity rooms – bathroom, shower room, swimming
pools etc. The humidity can cause short circuit, and effect in damaging the device.
21.The operating fan heater needs to be under supervision and in sight all the time. If you
are leaving the room with the fan heater, always turn the fan heater off. If the fan heater is
not used, the power plug has to be removed from the power outlet.
22.Do not connect the fan heater to the automatic switching device, for example
temperature controlling device or time switch.
23.Flammable materials, for example furniture, bedclothes, paper, clothes, curtains should
be kept at least one meter from the fan heater.
24.Do not cover the device or put any objects on it while it is operating. Do not use the
device to dry clothes.
25.The heating surfaces can heat to a temperature of 60 °C or higher. The fan heater
should be in a place that children and animals do not have access to.
26.The device is not intended to be installed or used in vehicles.
27.Some parts inside the device can be hot or cause sparking. Do not use the fan heater in
places, where gasoline, paints or other flammable materials are used or stored.
Device description:
1. "ON/OFF" Switch
3.B. Temperature UP button
Instruction Manual
1. Plug device into desired 220-240V power outlet. Picture 1.
2. Press "ON/OFF" switch (1) on side of the unit to "ON" position to turn on the device. Picture 2.
3. Select your desired fan speed by pressing fan speed button (2) to choice between high (HH) or low (LL) on digital display. Picture 3.
4. Select your desired temperature by pressing "+" button (3.A.) to raise temperature or "-" button (3.B.) to lower the temperature
between 15-32 degree of Celsius on digital display. Picture 4.
5. When finished work, press "ON/OFF" Switch (1) to "OFF" position and unplug the device from power outlet. Store in a cool, dry place
until next use. Picture 5.
Setting the timer
The device has a built-in timer that will automatically turn the unit off after a set amount of time.
1. While the unit is plugged in and turned on, press the Timer button (4) to active the function of timer. Picture 6.
2. Press Timer button (4), next to set desired number of hours by pressing button 3.B or 3.A. You can choose between 1-12 hours.
3. Once desired number of hours have been chosen, stop pressing buttons 3.B or 3.A.
4. To cancel timer settings, turn the device off.
NOTE: THE DEVICE HAS AUTOMATIC 12 HOURS DEFAULT TIME FEATURE.
NOTE: IF THE DEVICE STOPED WORKING BECAUSE OF OVERHEATING, PLEASE DETACH THE DEVICE FROM POWER SUPPLY
FOR RESET. AFTER MOMENT, PLUG IN THE DEVICE AGAIN.

CLEANING AND MAINTENANCE

1. Make sure the device is not hot.
2. Remove the plug from the socket before cleaning.
3. Keep the inlet and outlet openings clean. Do not allow dust to settle on them.
4. Use a dry or slightly damp cloth to clean the case.
5. Do not immerse the device in water.

TECHNICAL DATA

Voltage: 220-240V 50/60Hz
Power: 400W
Max power: 700W
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should
be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the
common waste bin.
ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM WICHTIGE
ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER BENUTZUNG BEWAHREN SIE
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
1. Vor Inbetriebnahme der Nutzung lesen Sie diese Bedienungsanleitung und befolgen Sie
2. Fan speed button
4. Timer button
DEUTSCH
DIESE FÜR DIE ZUKUNFT AUF
3.A. Temperature DOWN button
This device is made in class II insulation and does not require grounding.
The device is compliant with the requirements of the following standards:
The Low Voltage Standard (LVD)
Electromagnetic compatibility (EMC)
The product is CE marked on the nameplate
6