KUKEN EASYclean 6000 Manual Del Usuario página 24

MOUNTING
1. Take the handle, main body, lithium ion battery, clean water tank, dirty water tank, and brush set, charging station, drying tray, and
cleaning tool from the package.
2. Insert the handle until you hear a click (figure 1).
3. Turn the clean water tank over, insert it into the main body along the clean water tank into the slot until you hear a click (figure 2).
4. Press the release button on the lithium ion battery pack, then place the battery pack in the slot and push it slightly upward until
you hear a click (Figure 3).
5. Align the bottom of the dirty water tank with the inlet, then push it in until you hear a click (figure 4).
6. Insert the rotating brush into the brush base, rotate the rotating brush so that the brush can be aligned, meanwhile, make sure
that the lock can be aligned with the lock, then lock the rotating brush (figure 5).
1
5
EN
2
4
24
3