KUKEN EASYclean 6000 Manual Del Usuario página 30

Codes of
mistake
FF:05 The battery voltage is too low.
FF:06 Differential overvoltage in the battery.
FF:07 The discharge temperature is too high.
FF:08 The charging temperature is too high.
FF:09 The charging temperature is too low.
FF:10 Roller brush overcurrent.
FF:12 The dirty water tank is not installed.
Component
Plastic
housing
•
Cadmium (Cd)
•
Lead (Pb)
•
Mercury (Hg)
•
Hexavalent
chromium(CrVI)
•
Polybrominated
Biphenyls (PBB)
•
Polybrominated
Diphenyl ethers
(PBDE)
The lifetime of the components for environmental protection is 10 years. The time is valid under the conditions of use of this
manual.
•
: Indicates that the content of dangerous substances in all the homogeneous materials of the components complies with the
RoHS 2 directive of the Council (EU) 2015/863 and (EU) 2017/2102 that modifies Annex II of Directive 2011/65 / EU. .
X: Indicates that the content of hazardous substances in all the homogeneous materials of the components is the exempt element
according to the RoHS Directive 2 of the council (EU) 2015/863 and (EU) 2017/2102 that modifies Annex II of the Directive 2011/65. /
EU due to current level of technology.
EN
Possible reasons
Content of hazardous substances
PCB Cables
• •
• •
• •
• •
• •
• •
30
Soluciones
Check the connection or replace the battery.
Replace the battery.
Use the cleaner when the temperature becomes normal.
Charge it when the temperature returns to normal.
Charge it when the temperature returns to normal.
Check and clean the rotating brush.
Install the dirty water tank.
Metal
Adapter
parts
• •
•
X
• •
• •
• •
• •
Electronic rubber
Compo- compo-
nents nents
• •
• •
• •
• •
• •
• •