Safety Rules - PowerGrip YG-2 Manual De Instrucciones

2

SAFETY RULES

SAFETY RULES
POWERGRIP power console should be connected directly to the
stationary grounded outlet of the power network. Do not connect
console in parallel (i.e. daisy chain connection) to other electrical
devices, such as power supply protection devices, power filters or
UPS. Do not use extension cords or T-connectors. Non-compliance
with these requirements may cause injuries or equipment damage,
which will automatically incur warranty termination. If you are not
sure which power outlet is duly grounded, consult a competent elec-
trician.
Although POWERGRIP console is intended for considerable current
surges, it is recommended to unplug the device in case of heavy
thunderstorm. To disconnect the equipment connected to the con-
sole is not necessary.
Avoid water ingress in the console or the housing. In case of water
ingress disconnect the console from the power outlet. Use the
device only idoors. Do not use the console in the rooms with high
humidity.
In case any problems in console operation or its complete damage
may occur, do not try to remedy them unassisted. It may cause
serious injuries or death. Do not dissemble the console. This will
automatically incur warranty termination. Disconnect the console
from the network immediately and contact autorized . The manufac-
turer is not liable for console functioning and reparation of unauthor-
ized interference effects if the maintenance was performed in an
uncertified service center.
19