Configuration Menu - PowerGrip YG-2 Manual De Instrucciones

CONFIGURATION MENU

To enter configuration menu, disconnect the console from the
power outlet, wait for the screen to blink off, plug the console into
the outlet with pressed power button.
Short pressing of power button enables to change the settings of
the selected menu item, prolonged pressing moves you to the next
menu item.
Menu items:
oN
Selection of permanently operating outlet groups. From 1
to 3 in succession. Blue group indicator means that the
group will be operating permanently, red is switched off by
power button. For full disconnection of the console hold
the power button for some time with switched off automatic
restarting.
ES
Automatic restarting of permanently operating outlets after
protection activation. This menu item is accessible only
when at least one permanently operating group of
outlets is chosen. Blue group indicator means that the func-
tion for the group is active, red is inactive.
Xx
Selection of delays, where xx is time in seconds. Delay is
set for the group marked by indicator 3. If the indicator is
blue, delay is set before switching on the group, if it is red,
after switching off the selected group.
BH
The first stage of brightness.
B
The second stage of brightness.
Switching between the selected brightness stages
during the setting is done by bringing the hand close
to the touch pad. Touch pad in menu mode is not
active.
2
21
CONFIGURATION MENU