PROZIS EasyVac Manual Del Usuario página 7

• Press the power button. The vacuum sealer should start working and make
some noise.
• The LED indicator will also be switched on. This LED indicator will show you
vacuum and battery level. The LED indicator will flash once vacuum reaches
the preset level. It will also flash when the battery level is low.
USING EASYVAC ZIPPER BAGS
1. Place the food inside the vacuum zipper bag and make sure the zipper is
secure. Avoid overfilling the bag.
2. Lay the bag flat, on a stable solid surface. Make sure the area of the valve is
flat and free from any obstructions.
3. Attach the sealer to the bag valve and press the power button to start the
vacuum process. You may have to hold the sealer and press it down gently.
4. Once the air is extracted from the bag, the LED indicator will flash for a few
seconds and then the sealer will automatically stop.
5. Remove the sealer and press the bag valve with your finger to remove any
air bubbles (this can help prevent the valve from leaking). Place the bag
with food in the fridge or pantry.
Important tips:
• For juicy food like tomato, berries or salad leaves and delicate ingredients,
we recommend you not extracting all the air or they might end up crushed
by the vacuum sealing process. You can use the plastic or glass containers
for these foods as an alternative.
• Do not vacuum seal liquids in zipper bags. Use the glass or plastic contain-
ers for soups, sauces, and juices.
• Avoid overfilling the zipper bags and make sure the valve lays flat. When
vacuum sealing zipper bags, small amounts of crumbs or food particles can
be inadvertently pulled into the valve, creating a possible air leak.
en
7