Intended Use - Sonic 4800708 Instrucción

WARNING!
• Study, understand, and follow all instructions before operating this device.
• Do not exceed rated capacity.
• Use only on hard level surface.
• Adequately support the vehicle before starting repairs.
• Use of this product is limited to the removal, installation, and transportation in the lowered position, of
transmissions, transfer cases, and transaxles.
• No alterations shall be made to this product.
• Only attachments and/or adapters supplied by the manufacturer shall be used.
• Do not use this jack for any use other than the manufacturer specifi ed usage.
• Failure to heed these markings may result in personal injury and/or property damage.
Additional Notes:
• Save the receipt, warranty and these instructions.
• Do not modify the jack in any way. Unauthorized modifi cation may impair the function and/or safety and
could aff ect the life of the equipment. There are specifi c applications for which the jack was designed.
• Always check for damaged or worn out parts before using the jack. Broken parts will aff ect the equip-
ment's operation. Replace or repair damaged or worn parts immediately.
• When jack is not in use, store it in a secure place out of the reach of children. Inspect it for good working
condition prior to storage and before re-use.

Intended use

This machine is designed for removal, installation and transportation (in the lowered position) of transmis-
sions and transfer cases on passenger cars, vans and light trucks that are raised by an in-ground or above-
ground lift.
Description
Technical data
Model
Rated capacity
Min. height
Max. height
|
S O N I C - E Q U I P M E N T . C O M
4800708
0.5 ton
1,175mm
1,985mm
Saddle
Piston
Release valve
Casters
Air vent screw
Leg stands
Foot pedal