Sonic 4800708 Instrucción página 5

2. Locate the two leg stands.
3. Connect both leg stands to the bottom base by installing the four M12x25mmL bolts with four 12mm
washers and four 12mm spring washers supplied.
4. Fix the four casters to the ends of the leg stands using the M12 domed nuts with 12mm washers & 12mm
spring washers supplied.
5. Ensure all bolts and nuts are fully tightened.
6. Slide the saddle over the top of the main piston.
Saddle
Piston
Fig (6)
Casters
Leg stands
S O N I C - E Q U I P M E N T . C O M
|