Publicidad
Enlaces rápidos
Models/Modelos/Modèles
P88121LF-SD-W
Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
For easy installation of your
Peerless
faucet you will need:
®
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
Para instalación fácil de su llave
Peerless
usted necesitará:
®
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
Pour installer votre robinet
Peerless
facilement, vous devez:
®
• LIRE TOUTES les instructions avant
de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
www.peerlessfaucet.com
SINGLE HANDLE PULL-DOWN KITCHEN
87459
FAUCET
LLAVE DE UNA MANIJA DE MANGUERA
DESLIZABLE HACIA ABAJO PARA COCINAS
ROBINET MONOCOMMANDE À BEC
RÉTRACTABLE POUR ÉVIER DE CUISINE
(Included / Incluido / Inclus)
87459
1
3/32"
(2.45mm)
03/31/2015
Rev. A
Publicidad
Manuales relacionados para Peerless Faucet P88121LF-SD-W
Resumen de contenidos para Peerless Faucet P88121LF-SD-W
- Página 1 LLAVE DE UNA MANIJA DE MANGUERA DESLIZABLE HACIA ABAJO PARA COCINAS ROBINET MONOCOMMANDE À BEC RÉTRACTABLE POUR ÉVIER DE CUISINE Models/Modelos/Modèles P88121LF-SD-W Series/Series/Seria Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
- Página 2 For Three Hole Mount For Single Hole Mount Para Las Instalaciones De Tres Agujeros Para Las Instalaciones De Un Agujero Montage Sur Trois Trous Montage sur un trou SHUT OFF WATER SUPPLIES. Position faucet (1) with single or three hole escutcheon (2) on sink. Option: If surface of sink is uneven, use silicone under the baseplate or gasket.
- Página 3 Hot label Etiqueta roja Étiquette rouge Hose Installation. CONNECT TO WATER SUPPLIES. Push hose end (1) onto faucet outlet (2). Pull down moderately to ensure Make sure all fittings and end connections are free of debris. connection has been made. Faucet connections (1) are 3/8" compression fittings. Secure Attach the zinc weight (3) to the hose assembly in the approximate area metal nut (3) on faucet supply hoses (2) to supply valve shown.The weight should be on the upward swing of the hose, toward the connection (4) and hand tighten, then tighten one additional...
- Página 4 FLUSH SYSTEM / CHECK FOR LEAKS. Soap Dispenser Installation Remove sprayer assembly (1). Pull the hose assembly (2) out of the Remove nut (1). Separate head (2) from body (3). Insert body (3)through spout and be sure to hold the end of the hose down into the sink. Turn selected hole in sink. Make sure gasket (4) is properly seated in the faucet handle (3) to the full on mixed position. Turn on hot and cold water base.
- Página 5 Care Instructions Care should be given to the cleaning of this product. To clean: • Wipe gently with a damp cloth. • Blot dry with a soft towel. Maintenance SHUT OFF WATER SUPPLIES When replacing a part, follow the illustrated instructions provided on the back of the Repair Part Kit. If faucet leaks from under handle or from spout outlet Loosen set screw (1) inside of handle.
- Página 6 Specify Finish Especifíque el acabado Précisez la Finition RP81770 ▲ Handle Assembly with Set Screw, Button and Allen Wrench Ensemble de manette Avec Vis de fixation, Bouton et Llave Allen Mecanismo de llave con Tornillo de Ajuste, Botón y Clé Allen RP81769 Spout Ring & O-Rings RP81776 Aro para el Surtidor y Anillos “O” ▲ Anneau du bec et Joints toriques RP81972 Embase Casquillo...
- Página 7 Notes / Notas / Notes 87459 Rev. A...
- Página 8 & workmanship for as long as the original Peerless Faucet Company for all warranty claims. consumer purchaser owns their home. Peerless Faucet Company recommends using a professional plumber for all installation & repair.