ASROCK Q77M vPro Manual Del Usuario página 25

Surround Display Feature
This motherboard supports surround display upgrade. With the internal VGA output
support (DVI-D, D-Sub and DisplayPort) and external add-on PCI Express VGA
✁ ✂ ✄ ☎ ✆ ✝ ✞ ✟ ✁ ✠ ✡ ✁ ☎ ☛ ☞ ✝ ✡ ✠ ✌ ✞ ✝ ✍ ✎ ✡ ✏ ✡ ✠ ✡ ✑ ✍ ☎ ✞ ✒ ☎ ✟ ✂ ✂ ✞ ✟ ✠ ✄ ✄ ☛ ☎ ✓ ☞ ✁ ✝ ✔
Please refer to the following steps to set up a surround display environment:
1. Install the PCI Express VGA cards on PCIE1 and PCIE2 slots. Please
refer to page 18 for proper expansion card installation procedures.
2. Connect a DVI-D monitor cable to the DVI-D port on the I/O panel, connect a
D-Sub monitor cable to the D-Sub port on the I/O panel, or connect an
DisplayPort monitor cable to the DisplayPort port on the I/O panel. Then connect
other monitor cables to the corresponding connectors of the add-on PCI Express
VGA cards on PCIE1 and PCIE2 slots.
3. Boot your system. Press <F2> or <Del> to enter UEFI setup. Enter "Share
✕ ✡ ✖ ✞ ✂ ✝ ✗ ✞ ✓ ✍ ☛ ✞ ✠ ✍ ✞ ✁ ✄ ✌ ✟ ☎ ✍ ✍ ✎ ✡ ✖ ✡ ✖ ✞ ✂ ✝ ✁ ✓ ✁ ✏ ☛ ☞ ☛ ✍ ✝ ✍ ✞ ✘ ✙ ✚ ✕ ✛ ✜ ✆ ✘ ✢ ✣ ✕ ✛ ✜ ✆ ✘ ✤ ✚ ✥ ✕ ✛ ✜ ✆
✘ ✚ ✦ ✢ ✕ ✛ ✜ ✞ ✂ ✘ ✦ ✤ ✚ ✕ ✛ ✜ ✍ ✞ ✡ ✠ ✁ ✏ ☞ ✡ ✍ ✎ ✡ ✒ ✟ ✠ ✍ ☛ ✞ ✠ ✞ ✒ ✧ ★ ☎ ✟ ✏ ✔ ✩ ☞ ✡ ✁ ☎ ✡ ✖ ✁ ✪ ✡ ☎ ✟ ✂ ✡ ✍ ✎ ✁ ✍ ✍ ✎ ✡
value you select is less than the total capability of the system memory. If you do
✠ ✞ ✍ ✁ ✄ ✌ ✟ ☎ ✍ ✍ ✎ ✡ ✫ ✬ ✭ ✮ ☎ ✡ ✍ ✟ ✓ ✆ ✍ ✎ ✡ ✄ ✡ ✒ ✁ ✟ ☞ ✍ ✯ ✁ ☞ ✟ ✡ ✞ ✒ ✰ ✱ ✎ ✁ ✂ ✡ ✕ ✡ ✖ ✞ ✂ ✝ ✗ ✆ ✘ ✲ ✟ ✍ ✞ ✜ ✆ ✳ ☛ ☞ ☞
disable D-Sub function when an add-on VGA card is inserted to this motherboard.
4. Install the onboard VGA driver and the add-on PCI Express VGA card driver to
your system. If you have installed the drivers already, there is no need to install
them again.
5. Set up a multi-monitor display.
For Windows
Right click on desktop, choose "Properties", and select the "Settings" tab
so that you can adjust the parameters of the multi-monitors according to
the steps below.
A. Click the "Identify" button to display a large number on each monitor.
B. Right-click the display icon in the Display Properties dialog that you
wish to be your primary monitor, and then select "Primary". When
you use multiple monitors with your card, one monitor will always be
Primary, and all additional monitors will be designated as Secondary.
✴ ✔ ✱ ✡ ☞ ✡ ✍ ✍ ✎ ✡ ✄ ☛ ☎ ✓ ☞ ✁ ✝ ☛ ✞ ✠ ☛ ✄ ✡ ✠ ✍ ☛ ✑ ✡ ✄ ✏ ✝ ✍ ✎ ✡ ✠ ✟ ✖ ✏ ✡ ✂ ✚ ✔
D. Click "Extend my Windows desktop onto this monitor".
E. Right-click the display icon and select "Attached", if necessary.
✭ ✔ ✱ ✡ ✍ ✍ ✎ ✡ ✁ ✓ ✓ ✂ ✞ ✓ ✂ ☛ ✁ ✍ ✡ ✰ ✱ ✂ ✡ ✡ ✠ ✵ ✡ ☎ ✞ ☞ ✟ ✍ ☛ ✞ ✠ ✗ ✁ ✠ ✄ ✰ ✴ ✞ ☞ ✞ ✂ ✶ ✟ ✁ ☞ ☛ ✍ ✝ ✗ ✒ ✞ ✂ ✍ ✎ ✡
second monitor. Click "Apply" or "OK" to apply these new values.
✷ ✔ ✵ ✡ ✓ ✡ ✁ ✍ ☎ ✍ ✡ ✓ ☎ ✴ ✍ ✎ ✂ ✞ ✟ ✸ ✎ ✭ ✒ ✞ ✂ ✍ ✎ ✡ ✄ ☛ ☎ ✓ ☞ ✁ ✝ ☛ ✞ ✠ ☛ ✄ ✡ ✠ ✍ ☛ ✑ ✡ ✄ ✏ ✝ ✍ ✎ ✡
numbers three to six.
24
®
XP / XP 64-bit OS:
ASRock Q77M vPro Motherboard