ASROCK Q77M vPro Manual Del Usuario página 29

2.10 Jumpers Setup
The illustration shows how jumpers are
setup. When the jumper cap is placed on
pins, the jumper is "Short". If no jumper cap
is placed on pins, the jumper is "Open". The
illustration shows a 3-pin jumper whose
pin1 and pin2 are "Short" when jumper cap
is placed on these 2 pins.
Jumper
Clear CMOS Jumper
(CLRCMOS1)
(see p.2, No. 23)
Note: CLRCMOS1 allows you to clear the data in CMOS. To clear and reset the
system parameters to default setup, please turn off the computer and unplug
the power cord from the power supply. After waiting for 15 seconds, use a
jumper cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However,
please do not clear the CMOS right after you update the BIOS. If you need
✁ ✂ ✄ ☎ ✆ ✝ ✞ ☎ ✟ ✠ ✡ ☛ ☞ ✞ ☎ ✌ ✍ ✁ ✎ ✏ ✎ ✑
✎ ✔ ✞ ☎ ✑ ✍ ✑ ☎ ✚ ✒ ✝ ✑ ✙ ✆ ✌ ✕
✓ ✁ ✌ ✣ ✤ ✄ ☎ ✆ ✑ ☎ ✛ ☎ ✌ ✁ ☎ ✕
GUID and MAC address will be cleared only if the CMOS battery is removed.
28
Setting
Default Clear CMOS
✒ ✌ ✓ ✑ ✞ ✎ ✔ ✕ ✆ ✓ ✌ ✖
✞ ☎ ✌ ✑ ✞ ✎ ✓ ✕ ✁ ☞ ✌ ✛ ☎ ✜ ✁ ✝ ☎ ✍ ✁ ✎ ✕ ✁
✞ ✆ ✞ ☎ ✔ ✆ ✑ ✑ ☞ ✁ ✝ ✕ ✙ ✕ ✆ ☎ ✙ ✓ ✚ ☎ ✙ ✎ ✑ ☎ ✝ ✕ ☎ ✜ ✆ ✎ ✄
ASRock Q77M vPro Motherboard
Description
✞ ☎ ✗ ✘ ✡ ☛ ✙ ✍ ✁ ✎ ✚ ✎ ✑ ✛ ✁ ✁
✞ ☎ ✂ ✄ ☎ ✆ ✝ ✢ ✟ ✠ ✡ ☛ ✆ ✂
✔ ✝ ✁ ✒ ✄ ☎ ✙ ✥ ✦ ✧ ★
-