A
Pusher
B
Funnel
C
Lid
D
Filter
E
Pulp container
F
Anti-drip spout
G
Body of appliance
H
Side safety lock clips
3. Before first use
Read these instructions carefully before using your appliance for the first time
and keep to hand for future reference: failure to comply with the instructions will
release the manufacturer from all responsibility.
• Completely release the side safety lock clips (H). Remove the pusher (A), lid (C),
filter (D), pulp container (E), glass-holder accessory (N) and glasses (M).
• Clean all the accessories in warm water with washing-up liquid, dry and then re-
assemble the appliance.
You can use the juicer to get juice from practically all fruits and vegetables, whether
they are hard or soft. However, you will not manage to extract juice from bananas,
coconuts, avocado pears, blackberries, figs and aubergines.
Do not use the juicer to extract juice from fruit or vegetables that are too hard
and fibrous, such as ginger, celeria, sugar cane, etc.
4 A - STARTING UP THE JUICER
1.
Lock the side safety clips (H) and lid (C) securely.
2.
Cut the fruit or vegetables into pieces and remove stones. See section below
"P4 - Practical hints on using your Juicer" for more details on preparation.
3.
Place a glass under the spout to collect the juice.
4.
Make certain that the spout is in the low position (fig 1).
5.
Plug in the appliance.
6.
Start up the juicer by pressing the switch (I).
7.
Select the speed to correspond to the fruit (see table below) using button (J).
8.
Remove the pusher and insert the fruit or vegetables in pieces through the
funnel.
You must insert fruit and vegetables with the motor running.
2. Appliance description
I
ON/OFF switch
J
Speed selector
K
Cone (according to model)
L
Citrus press sieve (according to model)
M
3 glasses (according to model)
N
Glass holder accessory (according to model)
O
Cleaning brush
P
Cord storage
4. Using the Juicer
11