Zyxel NWA-3160 Manual Del Usuario página 9

Configure Wireless Settings
1 Click WIRELESS in the
navigation panel. A
screen similar to the
following appears. Not all
fields are available in all
models.
The wireless stations and the ZyXEL Device must use the same
SSID, channel ID and encryption settings for wireless
communication.
Operating Mode: Ensure that Access Point mode is selected.
802.11 Mode: Select the wireless standard you want your network to use. If you are
not sure which to select, select 802.11b+g.
Channel Width (NWA-3165 n/g mode only): Select the channel bandwidth you want
to use. If you are not sure, select 20/40 MHz.
Channel ID: Select the wireless channel you want your network to use. To have the
ZyXEL Device automatically select a channel, click Scan instead.
Short GI (NWA-3165 n/g mode only): Select Enable if your wireless clients support
the short guard interval. If you are not sure, select Disable.
A-MPDU Aggregation (NWA-3165 n/g mode only): Select Enable if your wireless
clients support the Aggregated MAC Protocol Data Unit standard. If you are not sure,
select Disable.
SSID Profile: Select the SSID profile you want to configure for network access from
the drop-down list box. This example uses the SSID03 profile.
2 Click Apply to save your settings.
ENGLISH
9