LaCimbali M32 Bistro dt1 Manual De Instrucciones página 38

English
" Before programming the cappuccino dispensing push but-
tons fill the filter holder with the correct serving of ground
coffee. Don't use coffee grouts for programming servings. "
Fit and tighten the filter holder (7) on the coffee dispenser unit, posi-
tioning the cup under the nozzle of the filter holder (7) and the cappuc-
cino system (2). Press the cappuccino dispensing push button (10) for
a few seconds until only the indicator lights of the milk (9) and cappuc-
cino (10) dispensing push buttons remain on flashing. You can now
programme the cappuccino push button (10):
1) DISPENSING MILK BEFORE COFFEE
Press (and keep momentarily pressed) the milk dispensing push but-
ton (9). The indicator light of the pressed push button will remain on
(not flashing). When the amount of milk in the cup reaches the required
level, release the push button (9). Once the programming of the milk
serving has been completed, press (and keep momentarily pressed)
the cappuccino dispensing push button (10) to program the coffee serv-
ing. The indicator light of the pressed push button will remain on (not
flashing). When the amount of coffee in the cup reaches the required
level, release the push button (10).
2) DISPENSING COFFEE BEFORE MILK
Press (and keep momentarily pressed) the cappuccino dispensing push
button (10) to program the coffee serving. The indicator light of the
pressed push button will remain on (not flashing). When the amount of
coffee in the cup reaches the required level, release the push button
(10). Once the programming of the milk serving has been completed,
press (and keep momentarily pressed) the milk dispensing push button
(9). The indicator light of the pressed push button will remain on (not
flashing). When the amount of milk in the cup reaches the required
level, release the push button (9).
1 - Alternately press the PROG button until the display shows:
2 - Press the button to program; the display will show:
3 - Press the >>> button; the display will show:
4 - Press the >>> button; the display will show:
To dispense frothy milk before coffee press the " + o - " button until the
display shows: "00"
To dispense coffee before frothy milk press the " + o - " button until the
display shows: "60"
Programming the cappuccino measures
9 10
2 7
dt 1
Dosage Programing
Press a Button
Selection 01 >
Water Dosage: 00
Selection 01 >
Milk Dosage: 00
Selection 01 >
Start Milk 00
English
9 10
2 7
dt 2
The LEDs of the buttons to be
programed turn on.
To change, press "+" or "-".
To change, press "+" or "-".