Publicidad
Idiomas disponibles
Idiomas disponibles
only about one week's data. When its storage space is full, the
system will automatically cover the earliest data circularly.
Therefore, you need to synchronize the data to your watch in
time.
Note: If the functions of call notification and SMS notification
have been enabled, you must keep the bluetooth connection in
connected state. The function of alarm clock notification,
however, supports offline notification.
4.The distance and calories displayed on the APP are
different from that on the watch. Why?
Answer: Different people have different physical mechanisms
and thus consume different calories when doing exercise. You
are recommended to set your personal information and
synchronize it to your watch before viewing the exercise data
on the watch.
5.The watch cannot be charged. Why?
1)Please check whether the main unit is inserted in a correct
direction.
2)When the main unit has electricity lower than 3.6V, there will
be a period for battery precharging.
Note: Usually, the watch will get into the normal charging state
in 3-5 minutes after you plugging in the charger.
6.If I keep wearing the watch, will the bluetooth radiation
generated by the bracket damage my body?
Answer: The bluetooth radiation generated by the watch is far
below American FCC standard and can be neglected.
Therefore, long-time wearing the watch does not cause
radiation damage to human body.
7.If I have multiple sleeping mode on a day, does the watch
record the data of all of these sleeping mode together?
Answer: The watch will record the data of multiple sleeping
modes if you switch on the sleeping mode manually.
8.The watch vibrates abnormally. Why?
Answer: The abnormal vibration may be mis- triggered because
the function of phone anti-lost is on. As wireless bluetooth
signals receive various interferences, the watch may vibrate
when the bluetooth signal is weak or the bluetooth con nection
is disconnected . There fore , you are recommended to turn off
- 14 -
Publicidad
