Diggro S2 Manual Del Usuario página 4

Product 2 charging schematic diagram
1.Take out the bracelet,Unlock the buckle and turn over the
strap.
2.Press down the touching key terminal to extract
the bracelet
3 . Choose the USB terminal to charge, phone
charger, laptop USB port are all compatible.(Charge
time: 2-3 H)
Connect the Watch To The App On Your Phone
1.Power on:
3 seconds, and the watch will be powered on and a pairing
code will be displayed on the screen to identify the watch.
Power off :Long press the button on the time interface for 3
seconds to enter the secondary menus, and browse through
these menus to switch to the Power Off option. Long press this
option to enter the Power Off interface. On this interface,
switch from ON to OFF and the numbers 5, 4, 3, 2, 1 will be
displayed on the screen. After the number 1 is displayed, the
watch will be powered off.
Among the secondary menus,
Reset:
select the Reset
icon and long press it to enter the Reset
interface. On this interface, switch from Off
to On, and the system will be reset and the
time and data of the watch will be reset to
the factory settings.
Long press the bottom of the watch screen for
- 2 -
Touch the keys