Publicidad
Idiomas disponibles
Idiomas disponibles
Timing Tool Set for Chrysler 2.5 CRD
3
4
5
GENERAL
This set is suitable for Chrysler Voyager, Grand Voyager with R2516C, R2516L, R2816K engines,
Jeep Cherokee (01-08) with 2,5 / 2,8L engines and LDV Maxus (05-08) with VM2516L engines.
IMPORTANT
x
These instructions are provided as a guide only.
x
Always refer to the vehicle manufacturer's service instructions, or a proprietary manual, to
establish the current procedure and data, also any warnings or cautions particular to the vehicle.
x
DO NOT use the set if any parts are missing or damaged.
x
DO NOT use this tool for any purpose other than that for which it is designed.
x
Never lay tools on the vehicle's battery. This may short the terminals together.
x
Wear suitable clothing to avoid snagging. Do not wear jewellery and tie back long hair.
x
Keep children and other unauthorised persons away from the working area.
x
Be careful when working on hot engines!
x
Beware: Danger of burn by hot manifolds or other components!
x
Assure the vehicle against unintended starting, before applying the tool.
TOOL LIST
No.
tensioner wrench
1
to be used as oem VM9660
2
balancer shaft locking pin
flywheel locking pin
(Voyager, Grand Voyager 2.5 / 2.8, LDV)
3
to be used as oem VM1068 / VM1089
camshaft locking pin (inlet)
4
to be used as oem VM1052
1
Application
2
No.
Application
camshaft locking pin (exhaust)
5
to be used as oem VM1053
6
flywheel locking pin
flywheel locking pin
7
(Jeep Cherokee 2.8)
to be used as oem VM1080
flywheel locking pin
8
(Jeep Cherokee 2.5)
to be used as oem VM8873
Art. 8500
6
7
8
Publicidad
