Installing The Adjustable Slicing Disc; Important - KitchenAid 5KFP1335 Manual De Instrucciones

SETTING UP YOUR FOOD PROCESSOR

Installing the adjustable slicing disc

IMPORTANT: The adjustable slicing disc can only be installed in one direction.
1
With the work bowl installed, place
the drive adapter on the power shaft
of the base.
3
Lower the slicing blade and slicing
adapter onto the drive adapter.
TIP: You may need to turn the disc/drive adapter until it drops down into place.
2
Holding the adjustable slicing disc by
the 2 finger grips, align the pins onto
the adjustable slicing disc adapter into
the L-slots on the disc. Slide the disc
down onto the adapter and turn to
engage the pins in the L-slot.
4
Install the work bowl cover, being sure
it locks into place.
17