Functional Variants - Balluff BML-S1A-Q/A-M-0-S184/KA Serie Manual De Instrucciones

BML-S1A_-Q/A_ _ _-M_ _ _-_0-S184/KA_ _
Linear Position Encoder
2 Functional variants of the BML-S1A displacement sensor
Cable
type
Connector
type
Limit switch Incremental
sensors sensors
Reference point sensor
Fig. 2-1: Sensor head configuration
System variant 1:
No reference point signal
System variant 2:
One reference point signal
System variant 3:
Pole-periodic
reference point signals
System variant 4:
Fixed periodic
reference point signals
System variant 5:
Distance-periodic
reference point signals**
* not for versions with analog output
** in development
The BML is a non-contact, incremental displacement feedback system
consisting of a sensor head and a magnetic tape. The system is available in
several variants: with position signal function only, with additional reference
point function and/or with limit switch function. All functions are implemented
by means of magnetic sensing. The reference position is integrated in the
tape, and limit switches can be attached at any desired position.
The following table show the functional variants with their possibilities.
Cable type
Output signal A/B signal
sin/cos signal
Reference signal None
Single signal
Pole-periodic*
Fixed periodic
Distance coded**
Limit switch None
Front and rear
BML-S1A...M_0_
BML-S1A...M_1_
BML-S1A...M_2_
BML-S1A...M_1_
BML-S1A...M_1_
Fig. 2-2: Length measurement systems
Fig. 2-3: Displacement system
with limit switch sensors
Connector type
Output signal A/B signal
sin/cos signal
Reference signal None
Single signal
Pole-periodic*
Fixed periodic
Distance coded**
Limit switch None
Tape with alternating north
and south poles
BML-M0_...-R0000
Tape with one ref. point
BML-M0_...-Rxxxx
BML-M0_...-R0000
Tape with multiple ref. points at
equal distances
BML-M0_...-Cxxxx
Tape with reference points based on
a mathematical algorithm**
BML-M0_...-Axxxx
Limit switch
magnet
english
3