Fein KBM 65 Q Manual De Instrucciones página 13

3 41 01 018 06 7 - Buch Seite 13 Dienstag, 16. März 2004 7:47 07
KBM 65 Q / KBM 65 QF
Operating instructions for core drill.
Overview.
1 Screw for setting the stroke range of
the core drill motor
Infinitely variable stroke range for a
quick, safe tool change.
2 Turnstile
Upward and downward movement of
the drill motor.
3 Depth scale
1 stroke mark stands for a 1 mm
upward and downward motion of the
drill motor.
4 Main switch
For switching the core drill ON and
OFF.
5 Support
Additional support to prevent the
magnetic drill stand from lifting.
6 Groove for safety strap
For securing the tool using the safety
strap.
7 Precision adjustment
For aligning the core drill without
displacing the magnet.
8 Magnetic foot
Secure the power tool to the magnetic
base.
9 Motor switch
For switching the drill motor ON and
OFF. Switch for setting the drill motor
speed from slow (SLOW) to
fast (FAST).
10 Gear setting for slow (•) or fast (••)
speed
Operate only when the motor has
slowed down or is at a standstill.
11 Tool holder (Quick IN)
For clamping the tool.
12 Adaptor with 3-jaw geared chuck
For clamping reamers.
13 Chipping protector
Protects the user from chips.
14 Adapter
Nut (a) has a left-handed thread.
15 Supplied accessories
Adaptor (M 18 x 6/P 1.5) (b),
Chuck with chuck wrench (c),
Long centering pin (119 mm) (d),
Short centering pin (104 mm) (e),
Chip hook (f),
Open-jawed wrench SW 22 (g),
Open-jawed wrench SW 27 (h),
Drift (i),
Socket screw wrench (j),
Safety strap (k),
Coolant pump (l),
Coolant hose (m),
Pump holder (n),
Chipping protector for 7 270 28 (o),
Chipping protector for 7 270 29 (p),
Power tool carry case, plastic (q).
For your safety.
Before using this power tool,
read and comply with:
these operating instructions,
the enclosed safety instructions
(document number 3 41 30 054 06 1),
the relevant national industrial safety
regulations.
EN
13