Sensor Control - Shelly 190955 Manual Del Usuario

Vibration or movement is detected.
DEVICE WEB PAGE – MOTION STATUS
Opening device page by IP manually, the following statuses are
available: motion status, vibration detection, battery level, light in-
tensity, sensor activity status and lightning mode.

Sensor control

In this menu you can set the basic parameters for the operation
of the sensor.
Illumination definitions
Shelly Motion has a built-in light sensor. It measures light intensity
in Lux, which can differ from the values measured by other devic-
es, depending on the measurement specifics and location of the
device. You can assign three different light modes: Dark, Twilight
and Bright. Each light mode can have custom predefined sensitiv-
ity values. By default Dark is under 100, Twilight is between 100
and 500 and Bright is above 500.
Motion sensitivity
Allows you to adjust the sensor's level of sensitivity. By default,
the value is 50, which allows the detection of objects over 15 kg
at a distance of 5 meters. If you have a pet, setting this value will
allow the sensor not to detect it while moving. Importantly, large
pets can be detected, especially if they stand on their hind legs.
You can adjust sensor sensitivity level based on your needs.
Motion blind time
Can be set in the range of 1 to 5 minutes. Within the Blind time pe-
riod, motion detections will not be reported. Only motions detect-
ed after Blind time, will be reported and information will be send.
User and Safety guide 35