Shelly 190955 Manual Del Usuario página 37

Internet & Security
Wifi mode – client
WiFi network settings and information, including the option to set
up a fixed IP address.
Wifi client backup
Backup network settings in case the sensor is lost or cannot be
connected to the primary WiFi network.
⚠ATTENTION! After connecting the backup WiFi network, the
sensor will remain connected to it until disconnected or restart it.
Wifi mode - access point
By default, during first use, Shelly Motion creates a network
named shellymotion-xxxx without a password. You can change
the network name and set a password.
Restrict login
Shelly motion can be set up by opening the IP address on the
Wi-Fi network. To restrict access to its built-in Web interface, you
can specify a name and password. This is often necessary if the
sensor is located in public networks with access by many users.
SNTP server
Server from where the device synchronize time and date.
MQTT and COAP settings
MQTT and COAP settings allowing the sensor to connect directly
to 3-party automation systems. Can be enabled/disabled sepa-
rately.
Cloud
Ability to deactivate or activate the connection to Shelly Cloud.
This option works independently of MQTT and CoAP
Actions – Control your other devices directly
This feature allows Shelly motion to control other devices on the
local network or the Internet (IFTTT and others) without a cloud
or other automation system. If you have a Shelly relay or a light
bulb or other device that can be controlled via the Internet, then
Shelly Motion can send the command directly. For more informa-
tion about the commands you can send to control other Shelly
User and Safety guide 37