ENGLISH
SHELLY MOTION WIFI SENSOR
Introduction to Shelly
Shelly® is a family of innovative Devices, which allow remote
control of electric appliances through mobile phone, PC or
home automation system. Shelly® uses WiFi to connect to the
devices controlling it. They can be in the same WiFi network or
they can use remote access (through the Internet). Shelly® may
work standalone, without being managed by a home automation
controller, in the local WiFi network, as well as through a cloud
service, from everywhere the User has Internet access. Shelly®
has an integrated web server, through which the User may adjust,
control and monitor the Device. Shelly® has two WiFi modes - ac-
cess Point (AP) and Client mode (CM). To operate in Client Mode,
a WiFi router must be located within the range of the Device.
Shelly® devices can communicate directly with other WiFi devic-
es through HTTP protocol. An API can be provided by the Manu-
facturer. Shelly® devices may be available for monitor and control
even if the User is outside the range of the local WiFi network, as
long as the WiFi router is connected to the Internet. The cloud
function could be used, which is activated through the web server
of the Device or through the settings in the Shelly Cloud mobile
application. The User can register and access Shelly Cloud, using
either Android or iOS mobile applications, or any internet browser
and the web site:
https://my.shelly.cloud/
What is Shelly Motion
Shelly Motion is high sensitive ultra-low power WiFi Motion sen-
sorwhich is connected to internet 24/7 and do not need additional
HUB to be used. Shelly Motion can detect and send a notifica-
tion if it detects movement or turns on your lights instantly. The
built-in acylserometer serves as a protection when someone tries
to remove or move the device, and the built-in light sensor gives
additional opportunities for automation of your home or office.
Shelly Motion has a built-in 6500mAh battery that allows it to be
User and Safety guide EN
5