Install The Hardware; Attaching Antennas; Wall Mounting - Zyxel NWA1100-N Guia De Inicio Rapido

2. If you changed your computer's IP address, return it to its previous
setting.
3. Change the wireless settings in the wireless stations to match those
of the NWA1100-N, if necessary. Refer to your wireless adapter's
documentation.
The NWA1100-N is now ready to connect to your switch or router.
You can do this now, or once you have attached the antennas and
mounted the NWA1100-N.
If the NWA1100-N cannot communicate with the network, ensure that the
NWA1100-N is using an IP address on the same subnet as the switch / router.

Install the Hardware

Attaching Antennas

Screw the antennas clockwise onto the
antenna connectors on the sides of your
NWA1100-N. The antennas should be
perpendicular to the ground and parallel to
each other.
Make sure the antennas are securely
screwed onto the antenna connectors.
Hardware Mounting
In general, the best location for the access point is at the center of your
intended wireless coverage area. For better performance, mount the
NWA1100-N high up in an area that is free of obstructions.
Wall-mounting
Do the following to attach your NWA1100-N to a wall.
12 12