EAS ELECTRIC EMV70DGN Manual De Instrucciones página 25

Full automatic programming
This function is used to start cooking with delayed start, and to cook for a set
period of time. You must place the food to be cooked in the oven and set it to the
desired cooking function and the required temperature depending on the type
of food to be cooked.
First: Press the "
and "-" button to adjust cooking period for the food you wish to cook. Press "
button to confirm, the day's time will appear on the screen and the symbols "A"
will begin to continuously light on the screen.
Second: keep pressing on "
When you see "End" on the time screen, use "+" or "-" button to adjust finishing
time. Press " " button to confirm, the day's time will appear on the screen and
the symbol "A" will begin to continuously light on the screen. The symbol "
disappears until the time cooking starts.
You can set a time which can be up 23.59 hours after the time obtained by adding
the cooking period to the day's time.
The oven will start to operate at the time calculated by subtracting the cooking
period from the set end time, and will switch off when the set end time is
reached. The oven will sound an audible alarm and the "A" symbol will flash. After
turning the function and cooking temperature selection wheels to 0, press any
button for less than 3 seconds to stop the alarm. Press the
than 3 seconds to return the oven to manual mode.
Please note that once the automatic mode is set, the set times cannot be
changed. Changing these times involves cancelling the automatic mode and
activating the corresponding mode. If you need to make changes to the
automatic mode, you will have to stop all settings and follow the above steps
again.
Specifications
1> When setting the time for each function, press and hold "+" or "-" for more than 3
seconds to make the values increase or decrease faster.
2> During time setting of these functions, if no button is pressed for 5 minutes, the
oven will return to manual mode.
3> During the time setting of these functions, you can press
seconds to cancel the current setting and activate the manual mode.
4> During timer setting, press + and
and the current timer will be cancelled to return to standby mode.
5> We suggest that you run the oven for 15 minutes at 200°C to remove any residue
left on the oven surfaces.
" button until you see " Dur " on the timer screen. Use the "+"
" button until you see "End" on the timer screen.
for more than 3 seconds. A beep will sound
9
"
"
button for more
for more than 3
V.4