Normal playback operation
I CD player playback
POWER
ON/OFF
q
POWER
Press the
switch to turn on the power.
Display indications
w
Press the
button.
OPEN/CLOSE
When the disc tray opens, place a disc on the tray with the label side up.
e
Gently press the front of the disc tray or press the
button to close the tray.
r
Press the
button.
PLAY
When the button is pressed, the
While the disc is playing, the display shows the track number and
elapsed playing time of the track currently playing, along with the
numbers of the tracks still to be played or playing.
Total number of tracks
Nunber of current track
Index number
TTL
TRK
INDX
6
7 8
9 10 11 12 13 14 15 16 17 18 19 20
Remaining track numbers
Refer to the figures on the pages at the back of this user's guide. The callout numbers on the figures correspond to those found in the text.
• Some of the operations described in this user's guide can only be operated from the remote control unit. In the description of controls, the
names of the buttons which are available on both the main unit and the remote control unit are enclosed in
which are available only on the remote control unit are enclosed in
TEXT
OPEN/CLOSE
PLAY
indicator lights up.
Minutes
Seconds
TIME
PLAY
OPEN/CLOSE
FILTER
To stop playback:
Press the
STOP
button.
To remove the disc:
Open the disc tray by pressing the
disc, then close the tray by lightly pressing its front edge. Always keep
the disc tray closed even when the CD player is not being used.
To pause playback:
PAUSE
Press the
button.
The PAUSE indicator lights up and playback pauses at the position
where the button was pressed. To resume playback from the pause
PAUSE
position, press the
To switch the time display:
Press the
button.
TIME
Each time the
button is pressed, the time display changes in the
TIME
following order: Elapsed playing time of the currently playing track →
Remaining playing time of the current track → Total remaining time in the
disc → Elapsed playing time of the current track.
.
7
STOP
PAUSE
CD PLAYER CD-17mkIII
OPEN/CLOSE
button, remove the
button again.
, and the names of the buttons