SMA Solar Technology 1D1-410-000-001 Instrucciones Para La Sustitución página 13

SMA Solar Technology AG
4. Loosen two screws of the protective cover using an
Allen key (AF 5) and remove the protective cover.
5. Use a current clamp to ensure that no current is
present in the DC cables.
6. Make a note of the position of the plugs.
7. Release and remove all DC connectors. To do this,
insert a flat-blade screwdriver or an angled
screwdriver (blade width: 3.5 mm) into one of the
side slots and pull the DC connectors straight out.
Do not pull on the cable.
Replacement Manual
5 Disconnecting the Inverter from Voltage Sources
STPTL-20-Display-RM-de-10 13