Start The Machine; Stop The Machine; Maintenance; Nozzle Maintenance - GreenWorks GDC60 Manual Del Operario

Ocultar thumbs Ver también para GDC60:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15
WARNING
Do the instructions on the solution bottle to prepare
detergent.
If it is necessary, use a funnel to prevent the spill of
detergent. Clean and dry the spilled detergent when you fill
it.
1. Put the detergent into the detergent tank.
2. Push and hold the lock button on the spray wand.
3. Install the detergent tank onto the spray wand.
Do not let detergent dry on the surface to prevent streaks.
4.4

START THE MACHINE

Figure 13.
CAUTION
Do not operate without the water supply connected.
CAUTION
Before you start the machine:
1. Turn the water supply on.
2. Pull the gun trigger to release air pressure.
3. If a stable stream of water come into view, release the
gun trigger.
1. Set the power switch to the "ON" ( | ) position.
2. Pull the gun trigger.
4.5

STOP THE MACHINE

1. Release the gun trigger.
2. Set the power switch to the "OFF" (O) position.
WARNING
If you do not use the machine:
Stop the machine.
Turn the water supply off.
Remove the battery pack.
Pull the gun trigger to release the remaining pressure
from the machine.
Lock the trigger safety button.
NOTE
NOTE
English
5

MAINTENANCE

Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
Remove the battery pack from the machine before
maintenance.
5.1

NOZZLE MAINTENANCE

Figure 10.
If there is too much pump pressure, the nozzle can become
clogged, you can feel a pulsing sensation while you pull the
gun trigger.
5.1.1
REMOVE THE NOZZLE
1. Push and hold the lock button on the spray wand.
2. Remove the nozzle from the spary wand.
5.1.2
CLEAN THE NOZZLE
1. Use a straight paper clip or cleaning tool to clean the
spray tip.
2. Flush and clean the unwanted materials out of the nozzle
with the garden hose.
3. Install the clean nozzle to the spray wand.
6
TRANSPORTATION AND
STORAGE
Remove the battery pack from the machine before
tranportation and storage.
6.1

MOVE THE MACHINE

Point the spray wand in a safe direction.
Only hold the machine with the handgrip.
6.2

STORE THE MACHINE

Make sure that the gun, the high pressure hose and the
pump are dry.
Make sure that children cannot come near the machine.
7
CAUTION
CAUTION
WARNING
WARNING
WARNING
WARNING
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pwc301

Tabla de contenido