Front Panel - Wagan Tech Elite 1000W PRO Manual De Usuario

FRONT PANEL

Ground Terminal
• Power Switch — This switch controls AC output of the inverter.
• Power LED (Green) — When this green LED is lit, the inverter is operating
normally.
• Fault LED (Red) — The RED indicator turns on as the inverter shuts down due
to overheating, overload, under voltage, or over voltage.
Immediately turn off all AC appliances if the FAULT LED is lit. Allow the
ƒ
inverter to cool before continuing. Make sure that the ventilation vents
are not blocked.
If an inverter shutdown was preceded by a buzzing sound, there may
ƒ
be an excessive load in combination with a low voltage or cable
problem.
Observe the Digital Display for low battery voltage. Normal
ƒ
operating range is 11V to 15V DC.
• Digital Display — The digital display alternates between input voltage
and output power (kilowatts). The DC input voltage displayed is what the
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
Power LED Digital Display
AC Outlets
©2015 Wagan Corporation. All Rights Reserved.
Fault LED
Power Switch
USB Power Outlet
4