Descargar Imprimir esta página
Ryobi SSP300 Guia De Inicio Rapido
Ocultar thumbs Ver también para SSP300:

Publicidad

Enlaces rápidos

WARNING:
This How To Get Started sheet is
not a substitute for reading the operator's manual.
To reduce the risk of injury or property damage, user
must read and understand operator's manual before
using this product.
For detailed instructions on how to perform any of
the steps below, please see the operator's manual.
Lubricate the piston.
1
Reassemble the unit.
2
Fill 1.5 qt. container with paint or stain.
3
Plug in the sprayer.
4
Spray on scrap material to prime.
Paint as desired, keeping the tip of the sprayer
5
8 to 10 inches away from the surface.
6
Unplug the sprayer.
7
Return unused paint or stain to original container.
8
Clean sprayer.
990000569
3-21-13 (REV:01)
HOW TO GET STARTED
5
2
7
1
8
4
3
6

Publicidad

loading

Resumen de contenidos para Ryobi SSP300

  • Página 1 HOW TO GET STARTED WARNING: This How To Get Started sheet is not a substitute for reading the operator’s manual. To reduce the risk of injury or property damage, user must read and understand operator’s manual before using this product. For detailed instructions on how to perform any of the steps below, please see the operator’s manual.
  • Página 2 POUR DÉBUTER CÓMO AVERTISSEMENT : Le présent feuillet ADVERTENCIA: Comprender esta intitulé « Pour débuter l’utilisation du produit hoja sobre Cómo comenzar no equivale a L’UTILISATION COMENZAR » ne remplace en aucune façon le manuel leer el manual del operador. Para reducir el d’utilisation.